Windows Systems

  • Casement window

    The hinge is installed on one side of the window sash and is connected with the window frame. According to the outward or inward opening, the window is divided into an open window and an open window. The features of this kind of windows are: simple structure, flexible opening, easy to clean, and good sealing performance when closed, it is the most widely used window type in civil buildings. 

    The focus is on two new developments: Simplified operation with added comfort, and heavier vent weights. By...

    Read more

    50 Series
    >
    60/65 Series
    >
    110-50 Series
    >
    138-60 Series
    >
    70 Series
    >
    130ZK Series
    >
    100-95 Series
    >

  • Top hung window

    Hinge (hinge) mounted on the upper side of the window and open to the outdoor direction. The outside hanging window is a kind of suspension window. It belongs to the flat window system as other suspension windows. Since this standard does not refer to the internal hanging window, the hanging window is usually referred to as the outside hanging window.  Schüco SmartActive can be applied to the window system in accordance with requirements, whether just for the handles as the...

    Read more

    50 Series
    >
    100-95 Series
    >
    60/65 Series
    >
    110-50 Series
    >
    138-60 Series
    >
    70 Series
    >

  • Tilt & turn inside window

    Inside the inverted window is through the operation of the hand sash handle, drive the corresponding movement of metal parts, so that the sash can be flat open to the interior or to the indoor dumping to open a certain angle ventilation. European Standard window: with optimized ventilation performance, improve safety, dustproof and rain-resistant, easy to clean.

    Read more

    60 65HTTI Series
    >
    110-50 Series
    >
    138-60 Series
    >

  • Parallel window

    A flat push window is a window with a flat push hinges (called Parallel Opening hinges, which is directly translated as parallel opening hinges) and can open or close a window fan in parallel to the normal direction of the facade. 

    Read more

    73NF Series
    >
    98PW Series
    >

  • Sliding window

    The sliding window / door slides on the track of the window frame with the sash equipped with pulley. It is divided into left and right, push and pull up and down. Sliding windows have the advantages of not occupying indoor space, beautiful appearance, economical price and good sealing performance. Adopt high-grade slide rail, gently push, open flexibly. With large pieces of glass, it not only increases indoor lighting, but also improves the overall appearance of the building. The stress state of the sash is good and it is not easy to damage, but the ventilation area is limited to a certain extent.

    Read more

    95/140 Series
    >
    130/196 Series
    >

  • Bi-folding window

    The folding window is mainly composed of a doorframe, a window sash, a transmission part, a rotating arm part, a transmission rod and a directional device. The side window side frame and the middle window fan are connected by the hinge, and the upper and lower rotating shaft is installed on the upper and lower ends of the window side window and the other side of the window. The rotating shaft is connected with the upper and lower rotating shaft seats on both sides of the doorway, and the side window will rotate around the side and rotate the middle fan together to 90 degrees, thus opening and closing the window sash. The folding window is a window that can be folded. When the window is completely opened, the window sash is arranged on one side or two sides of the hole. Because the rotating radius of the folding window is small, after opening the window, it can make full use of the front and rear space of the center of the door. 

    Read more

    125HDF Series
    >